You’ll have more time on your hands with this exciting piece of kit. This temperature and humidity controller will permanently change the way you interact with your monotub set-up. You won’t have to worry about how often to spray, how much to spray, etc., as our plug and play temperature and humidity controller does all the hard work for you.
This controller can handle up to 1500 watts. With two sockets within it’s controller, this temperature and humidity controller is ready to observe and maintain your projects. These are specially made in-house by our Electrical Elves!
With its dual controller, you can control both your heating matt/tube and a humidifier by simply plugging them in to the attached sockets. The temperature and humidity settings will be pre-set to 26-27c and 90-95% rh as a recommended standard for your projects. This means your controller is ready to go as soon as it arrives!
Perfect for both small box projects as well as full room set-ups. Choose our versatile Temperature and Humidity Controller for easy and precise control.
Changing the Settings
Although our temperature and humidity controller is pre-set at the desired temperature for most species of mushrooms, some may have a higher or lower requirement. You can use the controller to change these settings.
To change the point the heat mat turns on
Press and hold down the left arrow until the numbers on the screen start to flash. Now using the up and down arrows you will be able to change the temp to suit. This is the temperature that the heat mat will turn on at. When your happy with the temperature. Leave the controller for some 5 seconds and the sensed temperature will be displayed.
To change the point the heat mat turns off
Press and hold down the right arrow until the numbers on the screen start to flash. Now using the up and down arrows you will be able to change the temp to suit. This is the temperature that the heat mat will turn off at. When your happy with the temp. Leave the controller for some 5 seconds and the sensed temp will be displayed.
To change when the humidity turns on
Press and hold down the left arrow until the numbers on the screen start to flash. Now using the up and down arrows you will be able to change the humidity to suit. This is the point that the humidifier will turn on at. When your happy with the temp. Leave the controller for some 5 seconds and the sensed temp will be displayed.
To change when the humidity turns off
Press and hold down the right arrow until the numbers on the screen start to flash. Now using the up and down arrows you will be able to change the humidity to suit. This is the point that the humidifier will turn off at. When your happy with the temp. Leave the controller for some 5 seconds and the sensed temp will be displayed.
Specification
240v
10amp
Dual colour digital display
The main power lead is 2m.
The two socket leads are 1m each.
The combined temp and humidity probe is 1.5m.
The load output is 10 amp max. With most humidifiers being under 300 watts, the controller will easily allow from 7 watts to a 150 watt heater if needed.
Don’t Miss Out!
Why not give Shiny Spores a follow!
Disclaimer
Please note that it is illegal to grow magic mushrooms within the UK. We ask that you do not use these spores to grow mushrooms, but instead use them to study under a microscope. We cannot be held liable for any illegal use of these spores. Please check your local regulations as we cannot be responsible for the laws you should follow in your own country.
Reviews
There are no reviews yet.