Introducing our 60L Incubation Chamber
****The incubation and fruiting chamber have recently been remodeled. If your chamber has a “New and Improved” sticker you can use the reset instructions found further down on this page. If you require assistance with either version of the chamber, please get in touch and we can provide support. ****
Effortlessly keep temperatures within range
The double insulated walls easily keep the heat within your project. This will encourage the heat mat located within the two boxes to take it easy as most of the work is done for it. This means less power consumption at no cost to your project!
Heats and Stores Multiple Projects at Once
Heats up incredibly quickly and stays between 26-27c. All boxes come preset to these temperatures but can be changed. You can fit up to two 4lb bags, 6 1lb or 2lb bags, 4 Dutch kits and multiple jar products in this chamber (not all at once- might be pushing it a little!).
Preventing Contamination one Project at a Time
This tub comes with a set of air holes melted into the walls. This removes the rough surfaces of drilled air holes harbouring contamination we despise. The air holes are situated to prevent contamination from occurring within your chamber.
Keeping both you and your projects safe from harm
These boxes contain UK regulated heat mats, therefore if they were to be exposed to water, become damaged, or are otherwise exposed to malfunctions, the heating element will cut off to prevent any accidents. Due to these boxes thicker skin, they’re not susceptible to damage. Therefore, you can sleep happy knowing that your project and you are safe and sound!
Pre-set and Pre-positioned
The heat mat sealed within the two walls is prewired and set to maintain temperatures between 26-27c. The temperature probe which controls this factor is positioned within the main chamber and kept exactly where is needs to be with a sticker.
Flexible Settings and Temperature Probe
Not satisfied with our temperature range? Fancy setting it a little lower or higher? This can be easily done! We ask you call us so we can go through this process with you to ensure that you’ve performed this correctly the first time. Call us on 08009949404 and we can give you a helping hand! If you’ve done this before but need a refresher, simply:
1 Hold down the left arrow for 3 seconds or until it flashes. You may now use the up and down arrow to change this temp to 26c (ON temp). Leave the thermostat for five seconds to set.
2 Hold down the right arrow for 3 seconds or until it flashes. You may now use the up and down arrow to change this temp to 27c (OFF temp). Leave the thermostat for five seconds to set.
Thermostat will now maintain a base temp of 26-27c with an over run to 28.7c.
You can also move the temperature probe if you have multiple projects to somewhere more all-encompassing.
Stackable for bigger projects
These incubation chambers are perfect for those of you looking to grow an abundance of Gourmet Health Mushrooms. These boxes can be easily stacked on top of one another, supporting each box from underneath thanks to their thicker walls made from UK sourced boxes.
Designed by us, for you!
Ideal for:
Incubating:
Agar dishes.
Liquid Culture Jars-24 x 500ml or12 x 1000ml.
MycoTub-12 x 1200ml grain tubs stacked two high.
MycoPots-24 x 510ml jars or 12 x 1000ml jars.
Inject and forget bags-5x2lbs or 2-3x4lbs bags.
Brown Rice flour and Grain bags-12 x 1lbs.
Fruiting:
MycoTubs-6 x 1200ml tubs
MycoPots-12x 500-800ml pots
Inject and Forget Bags-5x2lbs or 2-3x4lbs bags.
6Lbs Hpoo cakes x2
MonoTub- 3lbs spawn and 3lbs bulk.
Size and Specification:
60cm long.
45cm wide.
33cm high.
20watt heat mat
Digital thermostat
Uk Plug 3amp
Lid included.
Warranty and Returns
Your chamber is protected under a 3 month warranty for any electrical or heating faults. If you believe your chamber to be effected by an issue, please call us on 08009949404 so we can assist you in resetting your chamber and sending out a replacement if necessary.
We will not replace a chamber if the fuse has gone, as this is a natural safety mechanism of the tub designed to prevent electrical surges from creating a fire safety issue.
We will not replace chambers due to natural wear and tear, i.e., cracks during storage, bent lids, etc.
If your chamber has been damaged during transit you have 14 days to contact us from the point of delivery and we will arrange to send you out a new chamber on the return of the damaged chamber, free of charge.
By purchasing this chamber you agree to this warranty as well as our return policies.
Don’t Miss Out!
Why not give Shiny Spores a follow!
Disclaimer
Please note that it is illegal to grow magic mushrooms within the UK. We ask that you do not use these spores to grow mushrooms, but instead use them to study under a microscope. We cannot be held liable for any illegal use of these spores. Please check your local regulations as we cannot be responsible for the laws you should follow in your own country.
Reviews
There are no reviews yet.