Introducing our Incubation Chamber
****The incubation and fruiting chamber have recently been remodeled. If your chamber has a “New and Improved” sticker you can use the reset instructions further down the page. If you require assistance with the either version of the chamber, please get in touch and we can provide support. ****
Effortlessly keep temperatures within range
The double insulated walls easily keep the heat within your project. This will encourage the heat mat located within the two boxes to take it easy as most of the work is done for it. This means less power consumption at no cost to your project!
Heats and Stores Multiple Projects at Once
Heats up incredibly quickly and stays between 26-27c. All boxes come preset to these temperatures but can be changed. You can fit up to two 4lb bags, 6 1lb or 2lb bags, 4 Dutch kits and multiple jar products in this chamber (not all at once- might be pushing it a little!).
Preventing Contamination one Project at a Time
This tub comes with a set of air holes melted into the walls. This removes the rough surfaces of drilled air holes harboring contamination we despise. The air holes are situated to prevent contamination from occurring within your chamber.
Keeping both you and your projects safe from harm
These boxes contain UK regulated heat mats, therefore if they were to be exposed to water, become damaged, or are otherwise exposed to malfunctions, the heating element will cut off to prevent any accidents. Due to these boxes thicker skin, they’re not susceptible to damage. Therefore, you can sleep happy knowing that your project and you are safe and sound!
Pre-set and Pre-positioned
The heat mat sealed within the two walls is prewired and set to maintain temperatures between 26-27c. The temperature probe which controls this factor is positioned within the main chamber and kept exactly where is needs to be with a sticker.
Flexible Settings and Temperature Probe
Not satisfied with our temperature range? Fancy setting it a little lower or higher? This can be easily done! We ask you call us so we can go through this process with you to ensure that you’ve performed this correctly the first time. Call us on 08009949404 and we can give you a helping hand! If you’ve done this before but need a refresher, simply:
1 Hold down the left arrow for 3 seconds or until it flashes. You may now use the up and down arrow to change this temp to 26c (ON temp). Leave the thermostat for five seconds to set.
2 Hold down the right arrow for 3 seconds or until it flashes. You may now use the up and down arrow to change this temp to 27c (OFF temp). Leave the thermostat for five seconds to set.
Thermostat will now maintain a base temp of 26-27c with an over run to 28.7c.
You can also move the temperature probe if you have multiple projects to somewhere more all-encompassing.
Stackable for bigger projects
These incubation chambers are perfect for those of you looking to grow an abundance of Gourmet Health Mushrooms. These boxes can be easily stacked on top of one another, supporting each box from underneath thanks to their thicker walls made from UK sourced boxes.
Designed by us, for you!
Perfect for…
Incubating:
Agar dishes.
Liquid Culture Jars-12 x 500ml or 6 x 1000ml.
MycoTub- 9 x 1200ml grain tubs stacked three high.
MycoPots-12 x 510ml jars or 6 x 1000ml jars.
Inject and forget bags-2x2lbs or 3x1lbs bags.
Brown Rice flour and Grain bags-9 x 1lbs.
Fruiting:
MycoTubs-3 x 1200ml tubs
MycoPots-4x 500-800ml pots
Inject and Forget Bags-2x2lbs or 3x 1lbs bags.
4Lbs substrate cake from the inject and forget bag
MonoTub- 1x 4lbs 50/50 rye grain and hpoo
How to reset the thermostat.
We have set the thermostat for at 26-27c.
If you would like to change the temperature or reset the thermostat please follow on…..
1 Hold down the left arrow for 3 seconds or until it flashes. You may now use the up and down arrow to change this temp to 26c (ON temp).
Leave the thermostat for 5 seconds to set.
2 Hold down the right arrow for 3 seconds or until it flashes. You may now use the up and down arrow to change this temp to 27c (OFF temp)
Leave the thermostat for 5 seconds to set.
Thermostat will now maintain a base temp of 26-27c with an over run to 28.7c.
Substrate temp will be about 24-25c.
Air inside the bag will be at 23-24c.
Size and Specification:
41cm long.
31cm wide.
28cm high.
7watt heat mat
Digital thermostat
Uk Plug 3amp
Lid included.
Warranty and Returns
Your chamber is protected under a 3 month warranty for any electrical or heating faults. If you believe your chamber to be effected by an issue, please call us on 08009949404 so we can assist you in resetting your chamber and sending out a replacement if necessary.
We will not replace a chamber if the fuse has gone, as this is a natural safety mechanism of the tub designed to prevent electrical surges from creating a fire safety issue.
We will not replace chambers due to natural wear and tear, i.e., cracks during storage, bent lids, etc.
If your chamber has been damaged during transit you have 14 days to contact us from the point of delivery and we will arrange to send you out a new chamber on the return of the damaged chamber, free of charge.
By purchasing this chamber you agree to this warranty as well as our return policies.
Don’t Miss Out!
Why not give Shiny Spores a follow!
Disclaimer
Please note that it is illegal to grow magic mushrooms within the UK. We ask that you do not use these spores to grow mushrooms, but instead use them to study under a microscope. We cannot be held liable for any illegal use of these spores. Please check your local regulations as we cannot be responsible for the laws you should follow in your own country.
greg johnson (verified owner) –
You could probably make this yourself and save a fiver but why would you!
It’s great quality, litterally plug and play, it’s everything you need to colonise and fruit your mushrooms!
I’ll be growing some edibles over the next few weeks but this will make life a lot easier, i’ve tried before using understairs cupboards with varying results but this should keep things nice and stable.
It would nice if this came with a blackout hood to keep things dark (or if one was sold separately that fitted) but that’s no biggy!
The turn around time was very fast indeed, impressed with thess guys so far I’ll report back after harvest and dinner time!
R B (verified owner) –
Great Quality Product 🙂
Christian Whiting (verified owner) –
Really happy with this product, I ordered and it was with me within a couple of days east to use and a massive help with my project 😉
G F (verified owner) –
Super handy piece of kit. Only had my first one for a couple of days and I’m just about to order a second. I would really recommend.
leegosden88 (verified owner) –
First time buyer yea seems to be working great can’t wait to see the outcome good things come to those who wait
BigG (verified owner) –
This is a fantastic piece of kit and is well worth the money, I’ve just ordered another one too stack on top on the one I’ve already got, so if you haven’t got one guys this is the one you want,
alexmeyer1 (verified owner) –
Absolutely amazing piece of equipment – would highly recommend this product. Will definitely be ordering another one in the near future!