We are happy to announce the Magic Mushroom Shimmer Grow Tent!
If you are looking for the best possible setup, a professional setup, a setup that will get you results then look no further! The Magic Mushroom shimmer grow tent will enable you to reap the bountiful and fruitful results of your labor.
What You Will Receive
1. 1x Mylar Tent 1m2 around the base and 2m tall.
2. 2x 4 tier Chrome Metal Shelves. 90cm x 45cm x 135cm high. 8 shelves total and floor space.
3. 2x 120watt bar heaters. Plug and Play.
4. 1x 1000Watt Digital Thermostat. Plug and Play.
5. 1x 2m 4 Socket Extension Lead. 13amp.
6. 6″ Circulation Fan. Clip on.
7. 30cm White Led Light.
Optional extras for this kit include:
1. 20x4lbs “Fully Automatic LightBags” 2 Per shelf.
This kit includes 20 x 4lbs LightBags. LightBags were invented right here in the United Kingdom. Containing a perfect mixture of Moist Sterilized Rye Grain, Coco Coir, Vermiculite and Perlite.
Fully automatic Mushroom Growing bags.
No daily Maintenance.
Normal time to first harvest 35-45 days.
Using LightBags in Tents is super easy and Guaranteed to bring smiles.
Average expected dry weight: 1.2 – 2.0
2. 8x 45L MonoTub Kits, 2 Per shelf.
Designed in house by the Elves.
1. This kit includes 8x 45L MonoTubs with 6 HEAT Formed Holes in each tub (No sharp edges).
2. Supplied with Polyfill wads to fill holes for air filtration.
3. To compliment each MonoTub. We have included 1.5kg Rye Grain bag + 3x1KG bags of Cvg Bulk Substrate.
4. Black liners. DIY cut down to size.
5. 2x MycoMedi Glove Packs.
Average expected dry weight: 1.6 – 2.4
MonoTubs are the most productive method of producing lots and lots and Lots of mushrooms. MonoTubs do require a small amount of daily maintenance and do carry a much higher risk of contamination but our products, we know you will do just great. We have also added enough Golden Vermiculite Casing to help new starters with that amazing pinset, tub after tub.
How To Use your MonoTub
Inject and colonize your Grain Shaker Pot or Rye Grain Bag@24- 27c. This should take 2 weeks. Bake, Mix and Check.
Cut the Black liners to size and place the liner into the provided MonoTubs
Then use the resulting Grain Spawn from the colonized Grain Shaker Pots or bags to layer in with the included Cvg bulk mix. This makes a spawn and bulk substrate lasagna. Yummy.
Use one MycoMedi packs for layering the spawn and substrate and one for your first harvest.
Always start with a thin layer of bulk substrate as the first layer.
Always end with a thin layer of bulk substrate as the last casing layer.
Keep the grain layers centrally placed and at least 4cm away from the side edges where the substrate lasagna meets the sides of the MonoTub.
Add a sprinkling of Golden Vermiculite over the final surface if you are new to MonoTubbing this will help your pins form.
Add the wads of Polyfill to the MonoTub holes.
Trim down the black liner so the Polyfil Wads are clear.
Lightly Spray down the surface vermiculite or bare coco coir casing and clip on the MonoTub lid.
Place into the Shimmering Wonder Tent.
Set the thermostat to 27c
Set the light timer to 12hrs on and 12hrs off.
Make sure the 6″ clip on fan is positioned so as to move the hot heater air up the center of tent. This will evenly distribute the heating to all MonoTubs.
From the first day.
Open the lid and spray mist into the tub. 3 good sprays if using vermiculite casing. 5 good sprays if just coco casing.
Repeat once a day AND once a Night. The spray will evaporate during the day and night periods while your away. Increase the misting frequency to 3 or 4 times a day if moisture is not building up inside the MonoTub.
Add fanning cycles if your Misting starts to form pools of water.
Keep going until you see small white dots form on the surface of the substrate or 20 days have passed.
If 20 days have passed and no pins have shown please contact the TEAM.
After the small dots have formed
The boxes are designed to breath easily in the tent environment.
Make sure to mist the small white dots well but not so much as to make pools of water.
After pins have formed
Yes you need to mist but you need to also let the pins breath.
So at this point please make sure not to spray the pins directly. Please mist into the MonoTub so the mist falls down over the pin heads.
Just the right amount of mist will last just up till the evening misting.
Cracked pin heads need more mist.
Dark pin heads had too much mist and may recover with extra fanning.
Any ways Standard MonoTub care is perfect.
When setting up Your Shimmering Wonder Tent.
Make sure to place the shelve pairs at equal high. This way when the shelves are placed front and back rather than side by side. You will be able to slide all items onto all shelves.
Place the 2x heater bars in between the shelves and clip the air fan on the lowest shelf. Direct the fan to blow up the hot air up between the middle of the two shelves just like in the picture. This is the best way to circulate the warm air and maintain the best even temperature at all shelf levels.
Place the temperature probe of the thermostat on the inside edge of the third shelf up from the floor. This will measure the warmest flow of air and give the most even results.
Support the light with the included tent ceiling bars. The pictures show the light shining down BUT. Turning the light around so the light shines up against the tent ceiling and then reflects down will give great results. Too bright of a light will mean small mushroom fruits. Reflected light should give a mushroom height of around 5-7″.
Set the thermostat to run at 27c.
All the rest is plug and play really.
Don’t Miss Out!
Why not give Shiny Spores a follow!
Disclaimer
Please note that it is illegal to grow magic mushrooms within the UK. We ask that you do not use these spores to grow mushrooms, but instead use them to study under a microscope. We cannot be held liable for any illegal use of these spores. Please check your local regulations as we cannot be responsible for the laws you should follow in your own country.
Reviews
There are no reviews yet.